Online Producer Gas Monitoring System

Online Producer Gas Monitoring System

Send Inquiry

Producer Gas Monitoring System Model ATS-208A

Basically, gasification is a process where a fuel or feedstock is cooked in low oxygen conditions. The equipment that carries out this whole process is usually called a gasifier.

Different zones inside the gasifier support drying, pyrolysis, combustion, and reduction reactions. The whole process produces gas that contains primarily carbon monoxide and hydrogen. These gases can be carried away before they combust, and then used elsewhere for energy. The gas is often called synthesis gas or syngas for short. It has also been referred to in the past as producer gas or town gas.

Applied Model ATS 204A Producer Gas Analyzer  has been designed considering the flexibility required in the environments that characterize syn gas and bio-mass applications.

The analyzer uses high-stability infrared sensors for the simultaneous measurement of CO, CO2 and CH4 . In addition, the analyzer can also be supplied with a non-consumable, long-life thermal conductivity cell for H2 that compensates for the interference effects of CO, CO2 and CH4 . This ensures that H2 will always read 2correctly regardless of the background gas composition. Paramagnetic sensor can be used for O2 analysis as an option.

All sensors are temperature-compensated for maximum analytical stability.

Applied Techno Systems Advantages

  • Ensured after sales & service support
  • Spares and accessories availability guaranteed
  • Low cost of ownership, maintenance and installation
  • Combination of technologies and integration under one roof

Specification :-

Principle   :  NDIR for CO,CO2,CH4,

  :  Electrochemical sensor for O2 (Paramagnetic sensor as option)

  : Thermal conductivity cell for H2
Ranges Available
  : O2         0-25.0%,     0-50.0%,         0-100.0%

  : H2         0-5.0%,       0-50.0%,         0-100.0%

  : CO        0-10.0%,      0-50.0%,        0-100.0%

  : CO2      0-10.0%,      0-50.0%,        0-100.0%

  : CH4      0-50.0%,      0-100.0%
  :   0.01% for all gases
Power Source   :  230VAC 50hz
Accuracy & Repeatability
  :  ± 1% of reading for all gases
Response Time (T-90)
  :  20-30 seconds to 90% step change
  :  Less than 2% of full scale per month
Computer Interface   :  RS 232, USB, RS485
Sensor Life   :  2-3 Years
Ambient Temperature Range   :           -5 to 55° C
Relay Output

Potential free contacts
Operating Gas Temperature

0-600° C
Dimension in mm   :  430 (W) X 150(H) X 250(D)
Weight   :  2.5 KG


  :  One Year